More maintenance and overhaul of the complete electrical equipment can extend the service life of the machine and save yourself a lot of manpower and material resources, such as maintenance costs. Do you know how to effectively maintain the incoming switch of the complete electrical equipment?
1．檢查設備的清潔程度，使用清潔的干布擦掉任何灰塵和油跡，可能的情況下可使用非腐蝕性洗滌劑。
1. Check the cleanliness of the equipment, wipe off any dust and oil stains with a clean dry cloth, and use non-corrosive detergent if possible.
2．檢查電氣成套設備銘牌是否完好。使用清潔干布半角這些銘牌清潔干凈。
2. Check whether the nameplate of complete electrical equipment is intact. Use a clean dry cloth to clean half of these nameplates.
3．擦掉灰塵、霉菌和氧化物，同時也要清潔抽出式斷路器的固定部分內部。確保斷路器室內無異物。
3. Wipe off dust, mold and oxides, and also clean the inside of the fixed part of the draw-out circuit breaker. Ensure that there is no foreign matter in the circuit breaker room.
4．用清潔干的布斷路器邊線及母線上的灰塵或污垢。
4. Use a clean and dry cloth to remove dust or dirt on the circuit breaker side line and bus.
5. Confirm that the bolts used for terminal connection are correctly tightened and that there is no sign of local overheating on the terminal. The heat can be identified by observing whether the color of the contact part changes. The contact part is usually silvery white.
7．檢查電氣成套設備的滑動觸點或端子排上的線纜是否牢固。
7. Check whether the cable on the sliding contact or terminal block of the complete electrical equipment is firm.
8．出現設置需要維修時，請認真閱讀相關資料。
8. Please read the relevant information carefully when the setting needs to be repaired.
The above is about asking about the relevant content of "How to effectively maintain the incoming switch of electrical complete equipment?" http://m.moca.net.cn matter!
公司地址：濟南市槐蔭區經十西路3788號
備案號：魯ICP備09028695號-3
魯公網安備37010402441282號
TEL:0531-69922480 18866409905
EMAIL:
首頁
產品
電話
置頂